FĒNIX 160
No. 51225
Single-phase portable undervoltage inverter for welding by MMA and TIG method.
FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc ensures its excellent stability even if fluctuating voltage in public electrical network occurs or while using long extension cable (up to 200 m of length).
Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control.
Further advantages of FĒNIX machine are high performance and efficiency, easy to use and the possibility of remote control connection.
PROPERTIES AND EQUIPMENT
- May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature)
- Optional use of up to 200 m (2.5 mm² cross-section) extension cable
- Enables welding when network voltage drops by as much as 40 % (from 140 V) using electrodes Ø 1.6; 2.0; 2.5 mm
- Connection of a remote control to regulate welding current
- Thermal protection with light indicator
- Under-voltage / over-voltage indicators
- Strap for easy carrying
Method MMA
- HOT START enables easier ignition of stick electrodes
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- ARC FORCE ensures arc stability
- V.R.D. feature = MMA safety system; 15 V at output terminals in resting state
- SOFT START MMA prevents outage of circuit breakers
Method TIG
- Manual arc ignition – LIFT ARC
- PULSE
- PULSE FREQUENCY
- DOWN SLOPE (deceleration time on end current)
- END CURRENT
| Input power 50/60 Hz | 1x230 V (-40%; +15%) |
| Protection – slow | 16 A |
| Welding current range | 10 – 150 A |
| Duty cycle 100 % | 110 A |
| Duty cycle 60 % | 125 A |
| Duty cycle 25 % | 150 A |
| Mains current/input 60 % | 16 A / 3.6 kVA |
| Open circuit voltage | 88 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 10–25 |
| Dimensions | 225 × 112 × 315 mm |
| Weight | 4.1 kg |
FĒNIX 160
No. 51225
Single-phase portable undervoltage inverter for welding by MMA and TIG method.
FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc ensures its excellent stability even if fluctuating voltage in public electrical network occurs or while using long extension cable (up to 200 m of length). Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Further advantages of FĒNIX machine are high performance and efficiency, easy to use and the possibility of remote control connection.
PROPERTIES AND EQUIPMENT
- May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature)
- Optional use of up to 200 m (2.5 mm² cross-section) extension cable
- Enables welding when network voltage drops by as much as 40 % (from 140 V) using electrodes Ø 1.6; 2.0; 2.5 mm
- Connection of a remote control to regulate welding current
- Thermal protection with light indicator
- Under-voltage / over-voltage indicators
- Strap for easy carrying
Method MMA
- HOT START enables easier ignition of stick electrodes
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- ARC FORCE ensures arc stability
- V.R.D. feature = MMA safety system; 15 V at output terminals in resting state
- SOFT START MMA prevents outage of circuit breakers
Method TIG
- Manual arc ignition – LIFT ARC
- PULSE
- PULSE FREQUENCY
- DOWN SLOPE (deceleration time on end current)
- END CURRENT
| Input power 50/60 Hz | 1x230 V (-40%; +15%) |
| Protection – slow | 16 A |
| Welding current range | 10 – 150 A |
| Duty cycle 100 % | 110 A |
| Duty cycle 60 % | 125 A |
| Duty cycle 25 % | 150 A |
| Mains current/input 60 % | 16 A / 3.6 kVA |
| Open circuit voltage | 88 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 10–25 |
| Dimensions | 225 × 112 × 315 mm |
| Weight | 4.1 kg |
