KIT 5000 W
STANDARD – No. 51150 | PROCESSOR – No. 5000wproc
MIG|MAG 3×400 V 50-450 A 40 COOL
Compact three-phase MIG/MAG welding machine for heavy machinety production. It includes a liquid cooling circuit for a welding torch.
KIT 5000 W are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 40-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- PRE-GAS / POST-GAS
- FEED BACK
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 32 A |
| Welding current range | 50 – 450 A |
| Output voltage range | 18.8 – 61.2 V |
| Duty cycle 100 % | 310 A |
| Duty cycle 60 % | 430 A |
| Duty cycle 35 % | 450 A |
| Mains current/input 60 % | 30 A / 21.6 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equip roll | 1 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress protection | IP 21 S |
| Dimensions | 940 × 688 × 939 mm |
| Weight | 165 kg |
KIT 5000 W
STANDARD – No. 51150
PROCESSOR – No. 5000wproc
Compact three-phase MIG/MAG welding machine for heavy machinety production. It includes a liquid cooling circuit for a welding torch.
KIT 5000 W are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 40-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- PRE-GAS / POST-GAS
- FEED BACK
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 32 A |
| Welding current range | 50 – 450 A |
| Output voltage range | 18.8 – 61.2 V |
| Duty cycle 100 % | 310 A |
| Duty cycle 60 % | 430 A |
| Duty cycle 35 % | 450 A |
| Mains current/input 60 % | 30 A / 21.6 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equip roll | 1 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress protection | IP 21 S |
| Dimensions | 940 × 688 × 939 mm |
| Weight | 165 kg |