STANDARD – No. 50275 | PROCESSOR – No. 50394 | SYNERGIC – No. 50427
MIG|MAG 3×400 V 40-190 A 10
Compact three-phase MIG/MAG welding machines.
KIT 205 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- GENERATOR
- EASY USE
- SPOT PULS
- BURN BACK (Processor/Synergic)
- PRE-GAS / POST-GAS (Processor/Synergic)
- FEED BACK (Processor/Synergic)
- TEST GAS (Processor/Synergic)
- UP-DOWN (Processor/Synergic)
- SOFT START (Processor/Synergic)
- JOB MODE (Synergic)
- RESTORE PROGRAM (Synergic)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 16 A |
| Welding current range | 40 – 190 A |
| Output voltage range | 19 – 39 V |
| Duty cycle 100 % | 80 A |
| Duty cycle 60 % | 95 A |
| Duty cycle 15 % | 190 A |
| Mains current/input 60 % | 5 A / 3.4 kVA |
| Winding | Cu |
| Number of adjustment points | 10 |
| Digital volt-ampere meter | only PROC. and SYN. |
| Wire feeder | 2-roll |
| Standard equip roll | 0.6 – 0.8 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 645 × 488 × 791 mm |
| Weight | 52 kg |
STANDARD – No. 50275
PROCESSOR – No. 50394
SYNERGIC – No. 50427
Compact three-phase MIG/MAG welding machines.
KIT 205 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- GENERATOR
- EASY USE
- SPOT PULS
- BURN BACK (Processor/Synergic)
- PRE-GAS / POST-GAS (Processor/Synergic)
- FEED BACK (Processor/Synergic)
- TEST GAS (Processor/Synergic)
- UP-DOWN (Processor/Synergic)
- SOFT START (Processor/Synergic)
- JOB MODE (Synergic)
- RESTORE PROGRAM (Synergic)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 16 A |
| Welding current range | 40 – 190 A |
| Output voltage range | 19 – 39 V |
| Duty cycle 100 % | 80 A |
| Duty cycle 60 % | 95 A |
| Duty cycle 15 % | 190 A |
| Mains current/input 60 % | 5 A / 3.4 kVA |
| Winding | Cu |
| Number of adjustment points | 10 |
| Digital volt-ampere meter | only PROC. and SYN. |
| Wire feeder | 2-roll |
| Standard equip roll | 0.6 – 0.8 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 645 × 488 × 791 mm |
| Weight | 52 kg |
