FĒNIX 200

No. 51347

MMA|TIG  1×230 V  10-190 A

Single-phase portable undervoltage inverter for welding by MMA and TIG method.

FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc ensures its excellent stability even if fluctuating voltage in public electrical network occurs or while using long extension cable (up to 200 m of length).

Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control.

Further advantages of FĒNIX machine are high performance and efficiency, easy to use and the possibility of remote control connection.

PROPERTIES AND EQUIPMENT

• May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature)
• Optional use of up to 200 m (2.5 mm² cross-section) extension cable
• Enables welding when network voltage drops by as much as 40 % (from 140 V) using electrodes Ø 1.6; 2.0; 2.5 mm
• Connection of a remote control to regulate welding current
• Thermal protection with light indicator
• Under-voltage / over-voltage indicators
• Strap for easy carrying

Method MMA

• HOT START enables easier ignition of stick electrodes
• ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
• ARC FORCE ensures arc stability
• V.R.D. feature = MMA safety system; 15 V at output terminals in resting state
• SOFT START MMA prevents outage of circuit breakers

Method TIG

• Manual arc ignition – LIFT ARC
• PULSE
• PULSE FREQUENCY
• DOWN SLOPE (deceleration time on end current)
• END CURRENT

FĒNIX 200

No. 51347

MMA|TIG  10-190 A

Single-phase portable undervoltage inverter for welding by MMA and TIG method.

FĒNIX machines are designed with energy-saving inverter technology, high-level microprocessor by using planar transformer. Show excellent results either in normal operation or in use on generator and also on long extension cables. The ideal characteristic of arc ensures its excellent stability even if fluctuating voltage in public electrical network occurs or while using long extension cable (up to 200 m of length). Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Further advantages of FĒNIX machine are high performance and efficiency, easy to use and the possibility of remote control connection.

PROPERTIES AND EQUIPMENT

• May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature)
• Optional use of up to 200 m (2.5 mm² cross-section) extension cable
• Enables welding when network voltage drops by as much as 40 % (from 140 V) using electrodes Ø 1.6; 2.0; 2.5 mm
• Connection of a remote control to regulate welding current
• Thermal protection with light indicator
• Under-voltage / over-voltage indicators
• Strap for easy carrying

Method MMA

• HOT START enables easier ignition of stick electrodes
• ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
• ARC FORCE ensures arc stability
• V.R.D. feature = MMA safety system; 15 V at output terminals in resting state
• SOFT START MMA prevents outage of circuit breakers

Method TIG

• Manual arc ignition – LIFT ARC
• PULSE
• PULSE FREQUENCY
• DOWN SLOPE (deceleration time on end current)
• END CURRENT