CZDEESPL
      
  CZDEESPL

KIT 2400

STANDARD – No. 51157  |  PROCESSOR – No. 51299

MIG|MAG  3×400 V  30-215 A  10

Compact three-phase MIG/MAG welding machines.

KIT 2400 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.

The main advantages of machines KIT are excellent welding properties, 10-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • PRE-GAS / POST-GAS (only PROCESSOR)
  • FEED BACK (only PROCESSOR)
  • UP-DOWN (only PROCESSOR)
  • SOFT START (only PROCESSOR)
  • TEST GAS (only PROCESSOR)
Input power 50/60 Hz3x 400 V
Protection – slow16 A
Welding current range30 – 215 A
Output voltage range20 – 36.5 V
Duty cycle 100 %170 A
Duty cycle 60 %190 A
Duty cycle 40%215 A
Mains current/input 60 %10.5 A / 6.7 kVA
WindingCu/Al
Number of adjustment points10
Digital volt-ampere meteronly PROCESSOR
Wire feeder4-roll
Standard equiped roll0.8 – 1.0 mm
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21 S
Dimensions655 × 486 × 884 mm
Weight65 kg

KIT 2400

STANDARD – No. 51157
PROCESSOR – No. 51299

MIG  3-P  30-215 A

Compact three-phase MIG/MAG welding machines.

KIT 2400 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.

The main advantages of machines KIT are excellent welding properties, 10-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • PRE-GAS / POST-GAS (only PROCESSOR)
  • FEED BACK (only PROCESSOR)
  • UP-DOWN (only PROCESSOR)
  • SOFT START (only PROCESSOR)
  • TEST GAS (only PROCESSOR)
Input power 50/60 Hz3x 400 V
Protection – slow16 A
Welding current range30 – 215 A
Output voltage range20 – 36.5 V
Duty cycle 100 %170 A
Duty cycle 60 %190 A
Duty cycle 40%215 A
Mains current/input 60 %10.5 A / 6.7 kVA
WindingCu/Al
Number of adjustment points10
Digital volt-ampere meteronly PROCESSOR
Wire feeder4-roll
Standard equiped roll0.8 – 1.0 mm
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21 S
Dimensions655 × 486 × 884 mm
Weight65 kg