KIT 500 W
STANDARD – No. 50279 | PROCESSOR – No. 50575 | SYNERGIC – No. 50548
MIG|MAG 3×400 V 30-450 A 40 COOL
Compact three-phase MIG/MAG welding machine for heavy machinery production. It includes a liquid cooling circuit for a welding torch.
KIT 500 W are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages are excellent welding skills, 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
SYNERGIC machines also have automatic adjustment of welding parameters and the possibility of programming. Standard equipment is 8 programs for common steels (2 types of gas and 4 Ø wire), the possibility of simple recording of your own programs – 160 welding parameters.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- FEED BACK
- PRE-GAS / POST-GAS
- UP-DOWN (Processor/Synergic)
- SOFT START (Processor/Synergic)
- RESTORE PROGRAM (Synergic)
- JOB MODE (Synergic)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 32 A |
| Welding current range | 30 – 450 A |
| Output voltage range | 20 – 50 V |
| Duty cycle 100 % | 310 A |
| Duty cycle 60 % | 430 A |
| Duty cycle 45 % | 450 A |
| Mains current/input 60 % | 25 A / 17.3 kVA |
| Winding | Cu |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equip roll | 1.0 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 872 × 620 × 880 mm |
| Weight | 158 kg |
KIT 500 W
STANDARD – No. 50279
PROCESSOR – No. 50575
SYNERGIC – No. 50548
Compact three-phase MIG/MAG welding machine for heavy machinery production. It includes a liquid cooling circuit for a welding torch.
KIT 500 W are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages are excellent welding skills, 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
SYNERGIC machines also have automatic adjustment of welding parameters and the possibility of programming. Standard equipment is 8 programs for common steels (2 types of gas and 4 Ø wire), the possibility of simple recording of your own programs – 160 welding parameters.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- FEED BACK
- PRE-GAS / POST-GAS
- UP-DOWN (Processor/Synergic)
- SOFT START (Processor/Synergic)
- RESTORE PROGRAM (Synergic)
- JOB MODE (Synergic)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 32 A |
| Welding current range | 30 – 450 A |
| Output voltage range | 20 – 50 V |
| Duty cycle 100 % | 310 A |
| Duty cycle 60 % | 430 A |
| Duty cycle 45 % | 450 A |
| Mains current/input 60 % | 25 A / 17.3 kVA |
| Winding | Cu |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equip roll | 1.0 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 872 × 620 × 880 mm |
| Weight | 158 kg |
