KIT 5000 WS
STANDARD – No. 51187 | PROCESSOR – No. 5000wsproc
MIG|MAG 3×400 V 50-450 A 40 COOL
Three-phase MIG/MAG welding machine with removable wire feeder for heavy machinery production. It includes a liquid cooling circuit for a welding torch.
KIT 5000 WS are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 40-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- PRE-GAS / POST-GAS
- FEED BACK
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 32 A |
| Welding current range | 50 – 450 A |
| Output voltage range | 18 – 62 V |
| Duty cycle 100 % | 290 A |
| Duty cycle 60 % | 390 A |
| Duty cycle 35 % | 450 A |
| Mains current/input 60 % | 27 A / 19.1 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equip roll | 1.0 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 S |
| Dimensions | 1265 × 688 × 925 mm |
| Weight | 172 kg |
KIT 5000 WS
STANDARD – No. 51187
PROCESSOR – No. 5000wsproc
Three-phase MIG/MAG welding machine with removable wire feeder for heavy machinery production. It includes a liquid cooling circuit for a welding torch.
KIT 5000 WS are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 40-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- PRE-GAS / POST-GAS
- FEED BACK
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 32 A |
| Welding current range | 50 – 450 A |
| Output voltage range | 18 – 62 V |
| Duty cycle 100 % | 290 A |
| Duty cycle 60 % | 390 A |
| Duty cycle 35 % | 450 A |
| Mains current/input 60 % | 27 A / 19.1 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equip roll | 1.0 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 S |
| Dimensions | 1265 × 688 × 925 mm |
| Weight | 172 kg |
