CZDEESPL
      
  CZDEESPL

KIT 600 WS

STANDARD – No. 50020  |  PROCESSOR – No. 50977  |  SYNERGIC – No. 600wssyn

MIG|MAG  3×400 V  50-700 A  40   COOL

Three-phase MIG/MAG welding machine with removable wire feeder for heavy machinery production. It includes a liquid cooling circuit for a welding torch.

KIT 600 WS are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, romovable wire feeder with an efficient motor, an EURO connector and electronics control.

The main advantages are excellent welding skills, 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.

SYNERGIC machines also have automatic adjustment of welding parameters and the possibility of programming. Standard equipment is 8 programs for common steels (2 types of gas and 4 Ø wire), the possibility of simple recording of your own programs – 160 welding parameters.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • BURN BACK
  • FEED BACK
  • PRE-GAS / POST-GAS
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • RESTORE PROGRAM (Synergic)
  • JOB MODE (Synergic)
Input power 50/60 Hz3x400 V
Protection – slow63 A
Welding current range50 – 700 A
Output voltage range19 – 51 V
Duty cycle 100 %480 A
Duty cycle 60 %600 A
Duty cycle 30 %700 A
Mains current/input 60 %46 A / 32 kVA
WindingCu
Number of adjustment points20
Digital volt-ampere meteryes
Wire feeder4-roll
Standard equip roll1.0 – 1.2
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions1438 × 650 × 957 mm
Weight234 kg

KIT 600 WS

STANDARD – No. 50020
PROCESSOR – No. 50977
SYNERGIC – No. 600wssyn

MIG  3-P  50-700 A  

Three-phase MIG/MAG welding machine with removable wire feeder for heavy machinery production. It includes a liquid cooling circuit for a welding torch.

KIT 600 WS are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, romovable wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages are excellent welding skills, 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
SYNERGIC machines also have automatic adjustment of welding parameters and the possibility of programming. Standard equipment is 8 programs for common steels (2 types of gas and 4 Ø wire), the possibility of simple recording of your own programs – 160 welding parameters.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • BURN BACK
  • FEED BACK
  • PRE-GAS / POST-GAS
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • RESTORE PROGRAM (Synergic)
  • JOB MODE (Synergic)
Input power 50/60 Hz3x400 V
Protection – slow63 A
Welding current range50 – 700 A
Output voltage range19 – 51 V
Duty cycle 100 %480 A
Duty cycle 60 %600 A
Duty cycle 30 %700 A
Mains current/input 60 %46 A / 32 kVA
WindingCu
Number of adjustment points20
Digital volt-ampere meteryes
Wire feeder4-roll
Standard equip roll1.0 – 1.2
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions1438 × 650 × 957 mm
Weight234 kg