CZDEESPL
      
  CZDEESPL

KITin 2040 MIG EURO

No. 51147

MIG|MAG  1×230 V  20-150 A

Single-phase portable MIG/MAG inverter with euro connector.

KITin 2040 MIG EURO is small, lightweight and with the high efficiency. There is plastic handle to carry it. It is suitable to operate from generator (mobile power supply), for example for building. Machine allows easy settings of welding parameters.

PROPERTIES AND EQUIPMENT

  • Low power consumption of energy and high performance
  • Excellent welding quality
  • Easy setting of welding parameters (welding voltage and wire feed speed are set at the same time by one control element according to strength of the welded material, the second control element is for soft voltage adjustment which determines the arc length)
  • Low weight and small size
  • Reliable construction
  • Thermal protection
  • High duty cycles
  • Place for a coil with wire Ø up to 200 mm
  • Possible to use wire Ø 0.6 – 0.8 mm
  • Possible to use tube wire
Input power 50/60 Hz1×230 V (± 15 %)
Protection – slow16 A
Welding current range20 – 150 A (CO₂), 20 – 170 A (Ar+CO₂)
Duty cycle 35 %150 A
Duty cycle 60 %120 A
Duty cycle 100 %100 A
Mains current/input 60 %12 A / 4,6 kVA
Output voltage range22 – 31 V
Ingress ProtectionIP 23 S
Connect of welding cablesEURO
Wire feed speed1 – 11 m/min
Dimensions470 × 200 × 310 mm
Weight13 kg
KITin 2040 MIG EURO

KITin 2040 MIG EURO

No. 51147

MIG|MAG  1-P  20-150 A

Single-phase portable MIG/MAG inverter with euro connector.

KITin 2040 MIG EURO is small, lightweight and with the high efficiency. There is plastic handle to carry it. It is suitable to operate from generator (mobile power supply), for example for building. Machine allows easy settings of welding parameters.

PROPERTIES AND EQUIPMENT

  • Low power consumption of energy and high performance
  • Excellent welding quality
  • Easy setting of welding parameters (welding voltage and wire feed speed are set at the same time by one control element according to strength of the welded material, the second control element is for soft voltage adjustment which determines the arc length)
  • Low weight and small size
  • Reliable construction
  • Thermal protection
  • High duty cycles
  • Place for a coil with wire Ø up to 200 mm
  • Possible to use wire Ø 0.6 – 0.8 mm
  • Possible to use tube wire

USAGE

The right choice to be used in production, industrial construction, metalworking, maintenance or workshops.

Input power 50/60 Hz1×230 V (± 15 %)
Protection – slow16 A
Welding current range20 – 150 A (CO₂), 20 – 170 A (Ar+CO₂)
Duty cycle 35 %150 A
Duty cycle 60 %120 A
Duty cycle 100 %100 A
Mains current/input 60 %12 A / 4,6 kVA
Output voltage range22 – 31 V
Ingress ProtectionIP 23 S
Connect of welding cablesEURO
Wire feed speed1 – 11 m/min
Dimensions470 × 200 × 310 mm
Weight13 kg