KITin 320 MIG
No. 51139
Three-phase portable digital inverters for welding by MIG/MAG method.
Portable welding machines KITin 320 MIG are designed as small, light and powerful digital threephase inverters. Digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process.
A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may be achieved even by less experienced welders.
Digital and progressive hardware design enabled reduction in weight, dimensions and consequently also in price of the this inverters. The construction of the performance part itself is excessive to ensure reliability, high performance and high duty cycle.
CHARACTERISTIC AND EQUIPMENT
- Excellent welding properties
- High performance while maintaining compact dimension of the machine
- High power surplus
- Simple and intuitive machine control and parameters setting
- Digital controls for welding quality enhancement and simplification; ensures continuous readjustment of welding characteristics to actual conditions during the welding process
- Digital volt-ampere meter
- Fan on demand – the fan runs only when necessary – saving the energy consumption
- Remote control connector
- Massive and compact design
- Continuous tension and wire movement speed regulation
- SYNERGIC function – automatic setting of welding parameters
- SOFT START and HOT START functions settings (for welding of aluminum)
- Continuous setting of wire burn-back
- Continuous setting of arc dynamics
- The option of saving up to 20 own welding programs
- The option to use 5 kg and 15 kg wire spool
- High performance and sturdy 4-roll wire feeder
| Input power 50/60 Hz | 3x400 V (± 10 %) |
| Protection – slow | 25 A |
| Duty cycle 100 % | 220 A |
| Duty cycle 40 % | 300 A |
| Output current range | 5 – 300 A |
| Output voltage range | 8 – 30 V |
| Maximum current | 300 A |
| Peak welding current | > 500 A |
| Output voltage | 65 V |
| Ingress Protection | IP 23 S |
| Material of wire – Steel / Aluminium / Stainless steel | yes |
| Wire feeder speed | 1 – 20 m/min |
| Cable panel socket | 35–50 |
| Dimensions | 430 × 270 × 595 mm |
| Weight | 27 kg |
KITin 320 MIG
No. 51139
Three-phase portable digital inverters for welding by MIG/MAG method.
Portable welding machines KITin 320 MIG are designed as small, light and powerful digital threephase inverters. Digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may be achieved even by less experienced welders.
Digital and progressive hardware design enabled reduction in weight, dimensions and consequently also in price of the this inverters. The construction of the performance part itself is excessive to ensure reliability, high performance and high duty cycle.
CHARACTERISTIC AND EQUIPMENT
- Excellent welding properties
- High performance while maintaining compact dimension of the machine
- High power surplus
- Simple and intuitive machine control and parameters setting
- Digital controls for welding quality enhancement and simplification; ensures continuous readjustment of welding characteristics to actual conditions during the welding process
- Digital volt-ampere meter
- Fan on demand – the fan runs only when necessary – saving the energy consumption
- Remote control connector
- Massive and compact design
- Continuous tension and wire movement speed regulation
- SYNERGIC function – automatic setting of welding parameters
- SOFT START and HOT START functions settings (for welding of aluminum)
- Continuous setting of wire burn-back
- Continuous setting of arc dynamics
- The option of saving up to 20 own welding programs
- The option to use 5 kg and 15 kg wire spool
- High performance and sturdy 4-roll wire feeder
| Input power 50/60 Hz | 3x400 V (± 10 %) |
| Protection – slow | 25 A |
| Duty cycle 100 % | 220 A |
| Duty cycle 40 % | 300 A |
| Output current range | 5 – 300 A |
| Output voltage range | 8 – 30 V |
| Maximum current | 300 A |
| Peak welding current | > 500 A |
| Output voltage | 65 V |
| Ingress Protection | IP 23 S |
| Material of wire – Steel / Aluminium / Stainless steel | yes |
| Wire feeder speed | 1 – 20 m/min |
| Cable panel socket | 35–50 |
| Dimensions | 430 × 270 × 595 mm |
| Weight | 27 kg |
