FĒNIX 200 PFC
No. 51348
Compact, portable, under-voltage welding machine for MMA and TIG welding, which is equipped with PFC (Power Factor Correction).
FĒNIX is equiped by high-tech using energy-saving inverter microprocessor technology PFC with the using of a planar transformer, which modulates the input stream so that it has an almost ideal sinusoidal waveform, which provides up to 92% efficiency of the machine. PFC technology ensures stable welding process with fluctuating voltage of electrical network, even when using long extension cables or using electric generators, without any apparent difference in the arc. The machine is able to operate from 90 V in electrical network. FĒNIX 200 PFC is able to work of the same protection from the network and to get against conventional welding machines up to 40 % more power (eg. where the machine ejects the fuse at 150 A, FĒNIX 200 PFC welds without problems on current of 200 A).
The machine has a function to limit the output current by which one can work with the machine in low protection in the network. FĒNIX PFC is predestined for use on generator, long extension cable and using the weak breakers.
FĒNIX 200 PFC provides excellent arc stability, simple and easy to understand controls, remote control options, performance and equipment.
Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Welding machine FĒNIX 200 PFC is designed for the most demanding users.
PROPERTIES AND EQUIPMENT
- May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature)
- Optional use of up to 200 m (2.5 mm² cross-section) extension cable
- It is possible to weld while 60 % (from 92 V) voltage decline (even with continuos decline) in network – with electrode Ø 1.6; 2.0; 2.5; 3.2; 4.0 mm
- Connection of a remote control to regulate welding current
- Thermal protection with light indicator
Method MMA
- HOT START enables easier ignition of stick electrodes
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- ARC FORCE ensures arc stability
- V.R.D. feature = MMA safety system; the maximum unloaded open circuit voltage across the output terminals is reduced to 15 V
- Function of limiting the output/input current to prevent loss of circuit breakers (option of simulation of any protection from 5 to 30 A)
- SOFT START MMA prevents outage of circuit breakers
Method TIG
- Manual arc ignition using – LIFT ARC
- PULSE
- PULSE FREQUENCY
- DOWN SLOPE (deceleration time on end current)
- END CURRENT
- Function to limit the output current
- Function of limiting the output/input current to prevent loss of circuit breakers (option of simulation of any protection from 5 to 30 A)
| Input power 50/60 Hz | 1x230 V (-60 %; +15 %) |
| Protection – slow | 20 A |
| Welding current range | 10 – 200 A |
| Duty cycle 100 % | 140 A |
| Duty cycle 60 % | 165 A |
| Duty cycle 40 % | 200 A |
| Mains current/input 60 % | 20 A / 4.6 kVA |
| Open circuit voltage | 88 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 35–50 |
| Dimensions | 225 × 112 × 425 mm |
| Weight | 5.5 kg |
FĒNIX 200 PFC
No. 51348
Compact, portable, under-voltage welding machine for MMA and TIG welding, which is equipped with PFC (Power Factor Correction).
FĒNIX is equiped by high-tech using energy-saving inverter microprocessor technology PFC with the using of a planar transformer, which modulates the input stream so that it has an almost ideal sinusoidal waveform, which provides up to 92% efficiency of the machine. PFC technology ensures stable welding process with fluctuating voltage of electrical network, even when using long extension cables or using electric generators, without any apparent difference in the arc. The machine is able to operate from 90 V in electrical network. FĒNIX 200 PFC is able to work of the same protection from the network and to get against conventional welding machines up to 40% more power (eg. where the machine ejects the fuse at 150 A, FĒNIX 200 PFC welded without problems on current of 200 A).
The machine has a function to limit the output current by which one can work with the machine in low protection in the network. FĒNIX PFC is predestined for use on generator, long extension cable and using the weak breakers.
FĒNIX 200 PFC provides excellent arc stability, simple and easy to understand controls, remote control options, performance and equipment. Machine controls are integrated into the button keypad, which increases the accuracy and reliability of the machine control. Welding machine FĒNIX 200 PFC is designed for the most demanding users.
PROPERTIES AND EQUIPMENT
- May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature)
- Optional use of up to 200 m (2.5 mm² cross-section) extension cable
- It is possible to weld while 60 % (from 92 V) voltage decline (even with continuos decline) in network – with electrode Ø 1.6; 2.0; 2.5; 3.2; 4.0 mm
- Connection of a remote control to regulate welding current
- Thermal protection with light indicator
Method MMA
- HOT START enables easier ignition of stick electrodes
- ANTI STICK allowing to easily detach the electrode when is stuck to the welded material
- ARC FORCE ensures arc stability
- V.R.D. feature = MMA safety system; the maximum unloaded open circuit voltage across the output terminals is reduced to 15 V
- Function of limiting the output/input current to prevent loss of circuit breakers (option of simulation of any protection from 5 to 30 A)
- SOFT START MMA prevents outage of circuit breakers
Method TIG
- Manual arc ignition using – LIFT ARC
- PULSE
- PULSE FREQUENCY
- DOWN SLOPE (deceleration time on end current)
- END CURRENT
- Function to limit the output current
- Function of limiting the output/input current to prevent loss of circuit breakers (option of simulation of any protection from 5 to 30 A)
| Input power 50/60 Hz | 1x230 V (-60 %; +15 %) |
| Protection – slow | 20 A |
| Welding current range | 10 – 200 A |
| Duty cycle 100 % | 140 A |
| Duty cycle 60 % | 165 A |
| Duty cycle 40 % | 200 A |
| Mains current/input 60 % | 20 A / 4.6 kVA |
| Open circuit voltage | 88 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 35–50 |
| Dimensions | 225 × 112 × 425 mm |
| Weight | 5.5 kg |
