KITin 1900 HF RS
No. 51487
MMA|TIG 1×230 V 10-180 A
Single-phase portable inverter for welding by MMA and TIG method.
KITin 1900 HF RS is the latest generation of inverter machines with higher performance, better parameters, new features and design. They are designed for industrial and professional use.
They are constructed with the use of high-frequency technology with fast regulation of welding current. Machines are characterized with high load factors (130 A at 100 %) and performance, low electrical power consumption and excellent welding properties. They are lightweight, small size and mostly reliable.
These machines are designed for operations where maximum utility value and high performance at a reasonable price are emphasized. Seamless welding on long extensions cables.
FEATURES AND EQUIPMENT
- Excellent welding properties in MMA and TIG
- Processor control
- HF (High Frequency) non-contact start
- Up-Down remote control / potentiometer connector in the TIG torch handle
- Connector for remote control Up-Down / potentiometer for MMA methode
- Display showing set values
- Handle and strap for easy carrying
- Plexiglas control panel hinged cover
- Thermal protection with a signal light
- HOT START
- SOFT START
- ANTI STICK
- V.R.D.
- ARC FORCE
- BALANCE
- TIG HF
- PRE GAS / POST GAS
- TIG UP-DOWN SLOPE
- CYCLE
- PULSE (adjustable functions: I2, balance, frequency)
- 2-Stroke / 4-Stroke
| Input power 50/60 Hz | 1 x 230 V |
| Protection – slow | 20 A |
| Welding current range | 10 – 180 A |
| Duty cycle 100 % | 130 A |
| Duty cycle 60 % | 170 A |
| Duty cycle at max. I | 50 % |
| Mains current/input 60 % | 36 A / 8.28 kVA |
| Open circuit voltage | 95 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 35 – 50 |
| Dimensions | 430 × 149 × 283 mm |
| Weight | 9.3 kg |
KITin 1900 HF RS
No. 51487
MMA|TIG 10-180 A
Single-phase portable inverter for welding by MMA and TIG method.
KITin 1900 HF RS is the latest generation of inverter machines with higher performance, better parameters, new features and design. They are designed for industrial and professional use.
They are constructed with the use of high-frequency technology with fast regulation of welding current. Machines are characterized with high load factors (130 A at 100 %) and performance, low electrical power consumption and excellent welding properties. They are lightweight, small size and mostly reliable. These machines are designed for operations where maximum utility value and high performance at a reasonable price are emphasized. Seamless welding on long extensions cables.
FEATURES AND EQUIPMENT
- Excellent welding properties in MMA and TIG
- Processor control
- HF (High Frequency) non-contact start
- Up-Down remote control / potentiometer connector in the TIG torch handle
- Connector for remote control Up-Down / potentiometer for MMA methode
- Display showing set values
- Handle and strap for easy carrying
- Plexiglas control panel hinged cover
- Thermal protection with a signal light
- HOT START
- SOFT START
- ANTI STICK
- V.R.D.
- ARC FORCE
- BALANCE
- TIG HF
- PRE GAS / POST GAS
- TIG UP-DOWN SLOPE
- CYCLE
- PULSE (adjustable functions: I2, balance, frequency)
- 2-Stroke / 4-Stroke
| Input power 50/60 Hz | 1 x 230 V |
| Protection – slow | 20 A |
| Welding current range | 10 – 180 A |
| Duty cycle 100 % | 130 A |
| Duty cycle 60 % | 170 A |
| Duty cycle at max. I | 50 % |
| Mains current/input 60 % | 36 A / 8.28 kVA |
| Open circuit voltage | 95 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 35 – 50 |
| Dimensions | 430 × 149 × 283 mm |
| Weight | 9.3 kg |
