KITin 1500 HF
No. 50113
Welding inverter with HF ignition for welding by TIG method.
KITin 1500 HF is inverter welding machine designed with the use of high frequency technology with the fast microprocessor regulation. Machines are fully equipped and designed for welding method TIG with touchless start HF (High Frequency). By using of method TIG welded stainless steel, copper and its alloys.
The controls of machine are integrated in the new generation of keyboard that replaces the standard mechanical solutions. This increases the reliability and precision of machine setup.
PROPERTIES AND EQUIPMENT
- Easy display showing setting value
- Simple and clear graphics with big buttons
- Adjustable pre / post gas
- TIG UP / DOWN SLOPE
- TIG HF
- HOT START
- ARC FORCE
- ANTI STICK
- TIG CYCLE
- TIG PULSE (adjustable I2, frequence)
- 2 stroke / 4 stroke
- TIG END CURRENT
- Connector for the remote control UP-DOWN in the handle of the torch for TIG; the remote control UP-DOWN for MMA
| Input power 50/60 Hz | 1×230 V |
| Protection – slow | 16 A |
| Welding current range | 10 – 150 A |
| Duty cycle 100 % | 95 A |
| Duty cycle 60 % | 120 A |
| Duty cycle at max. I | 30 % |
| Mains current/input 60 % | 16 A / 3.6 kVA |
| Open circuit voltage | 88 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 35–50 |
| Dimensions | 245 × 143 × 390 mm |
| Weight | 6.6 kg |
KITin 1500 HF
No. 50113
KITin 1500 HF is inverter welding machine designed with the use of high frequency technology with the fast microprocessor regulation. Machines are fully equipped and designed for welding method TIG with touchless start HF (High Frequency). By using of method TIG welded stainless steel, copper and its alloys.
The controls of machine are integrated in the new generation of keyboard that replaces the standard mechanical solutions. This increases the reliability and precision of machine setup.
PROPERTIES AND EQUIPMENT
- Easy display showing setting value
- Simple and clear graphics with big buttons
- Adjustable pre / post gas
- TIG UP / DOWN SLOPE
- TIG HF
- HOT START
- ARC FORCE
- ANTI STICK
- TIG CYCLE
- TIG PULSE (adjustable I2, frequence)
- 2 stroke / 4 stroke
- TIG END CURRENT
- Connector for the remote control UP-DOWN in the handle of the torch for TIG; the remote control UP-DOWN for MMA
| Input power 50/60 Hz | 1×230 V |
| Protection – slow | 16 A |
| Welding current range | 10 – 150 A |
| Duty cycle 100 % | 95 A |
| Duty cycle 60 % | 120 A |
| Duty cycle at max. I | 30 % |
| Mains current/input 60 % | 16 A / 3.6 kVA |
| Open circuit voltage | 88 V |
| Ingress Protection | IP 23 S |
| Cable panel socket | 35–50 |
| Dimensions | 245 × 143 × 390 mm |
| Weight | 6.6 kg |
