KITin 220 HF
No. 51189
Three-phase portable digital inverters for welding by MMA and HF method.
Portable welding machines KITin 220 HF are designed as small, light and powerful digital threephase inverters.
Digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may be achieved even by less experienced welders.
Digital and progressive hardware design enabled reduction in weight, dimensions and consequently also in price of the this inverters. The construction of the performance part itself is excessive to ensure reliability, high performance and high duty cycle.
CHARACTERISTIC AND EQUIPMENT
- Excellent welding properties
- High performance while maintaining compact dimension of the machine
- High power surplus
- Simple and intuitive machine control and parameters setting
- Digital controls for welding quality enhancement and simplification; ensures continuous readjustment of welding characteristics to actual conditions during the welding process
- Digital volt-ampere meter
- Fan on demand – the fan runs only when necessary – saving the energy consumption
- Remote control connector
- Massive and compact design
- Practical deposit box for welding cables and electrodes at the side cover
- ARC FORCE function for arc stabilization with the option of setting the intensity
- HOT START function for easier arc ignition
- ANTI STICK function for easier detachment of a sticking electrode
- V.R.D. and START CONTROL protection for assuring work safety
- DPC and SOFT POWER ON function for problem-free welding on a public electricity network
- It is possible to use rutile, basic and aluminum electrodes
- Setting of pre-gas/post-gas, current up-slope, down-slope, 2/4 cycle, etc.
- PULS welding
- PULS FREQUENCE
- PULS BALANCE for pulse welding
- Touch-free ignition
- CYCLE function
- 20 memory positions for own programs
| Input power 50/60 Hz | 3x400 V (±10 %) |
| Protection – slow | 16 A |
| Duty cycle 100 % | 200 A |
| Output current range | 5 – 200 A |
| Maximum current | 300 A |
| Output voltage | 65 V |
| Ingress Protection | IP 23 S |
| Diameter of electrodes | 1.6 – 5.0 mm |
| Cable panel socket | 35–50 |
| Dimensions | 430 × 190 × 540 mm |
| Weight | 19.7 kg |
KITin 220 HF
No. 51189
Three-phase portable digital inverters for welding by MMA and HF method.
Portable welding machines KITin 220 HF are designed as small, light and powerful digital threephase inverters.
Digital controls ensure not only optimal settings of the welding characteristics, but their dynamic adaptation during the welding process as well. In this way there is achieved a substantially higher quality of weld joint and simplification of welding process. A significant benefit is achieved in new functions, which help to keep the welding arc in an optimal working characteristics. Due to this arc control technology excellent results may be achieved even by less experienced welders.
Digital and progressive hardware design enabled reduction in weight, dimensions and consequently also in price of the this inverters. The construction of the performance part itself is excessive to ensure reliability, high performance and high duty cycle.
CHARACTERISTIC AND EQUIPMENT
- Excellent welding properties
- High performance while maintaining compact dimension of the machine
- High power surplus
- Simple and intuitive machine control and parameters setting
- Digital controls for welding quality enhancement and simplification; ensures continuous readjustment of welding characteristics to actual conditions during the welding process
- Digital volt-ampere meter
- Fan on demand – the fan runs only when necessary – saving the energy consumption
- Remote control connector
- Massive and compact design
- Practical deposit box for welding cables and electrodes at the side cover
- ARC FORCE function for arc stabilization with the option of setting the intensity
- HOT START function for easier arc ignition
- ANTI STICK function for easier detachment of a sticking electrode
- V.R.D. and START CONTROL protection for assuring work safety
- DPC and SOFT POWER ON function for problem-free welding on a public electricity network
- It is possible to use rutile, basic and aluminum electrodes
- Setting of pre-gas/post-gas, current up-slope, down-slope, 2/4 cycle, etc.
- PULS welding
- PULS FREQUENCE
- PULS BALANCE for pulse welding
- Touch-free ignition
- CYCLE function
- 20 memory positions for own programs
| Input power 50/60 Hz | 3x400 V (±10 %) |
| Protection – slow | 16 A |
| Duty cycle 100 % | 200 A |
| Output current range | 5 – 200 A |
| Maximum current | 300 A |
| Output voltage | 65 V |
| Ingress Protection | IP 23 S |
| Diameter of electrodes | 1.6 – 5.0 mm |
| Cable panel socket | 35–50 |
| Dimensions | 430 × 190 × 540 mm |
| Weight | 19.7 kg |
