CZDEESPL
      
  CZDEESPL
KIT 225

STANDARD – No. 50278  | PROCESSOR – No. 50395  |  SYNERGIC – No. 50558

MIG|MAG  3×400 V  30-195 A  10

Compact three-phase MIG/MAG welding machines.

KIT 225 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.

In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • GENERATOR
  • EASY USE
  • SPOT PULS
  • BURN BACK (Processor/Synergic)
  • PRE-GAS / POST-GAS (Processor/Synergic)
  • FEED BACK (Processor/Synergic)
  • TEST GAS (Processor/Synergic)
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • JOB MODE (Synergic)
  • RESTORE PROGRAM (Synergic)
Input power 50/60 Hz3x400 V
Protection – slow16 A
Welding current range30 – 195 A
Output voltage range19 – 34 V
Duty cycle 100 %120 A
Duty cycle 60 %150 A
Duty cycle 25 %195 A
Mains current/input 60 %6.8 A / 4.6 kVA
WindingCu
Number of adjustment points10
Digital volt-ampere meteronly PROC. and SYN.
Wire feeder2-roll
Standard equiped roll0.8 – 1.0
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions645 × 488 × 791 mm
Weight62 kg
KIT 225

STANDARD – No. 50278
PROCESSOR – No. 50395
SYNERGIC – No. 50558

MIG  3-P  30-195 A

Compact three-phase MIG/MAG welding machines.

KIT 225 are professional welding machines. The main advantages of machine KIT are excellent welding capabilities, 10-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.

In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 6 programmes for standard steels (2 types of gas and 3 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • GENERATOR
  • EASY USE
  • SPOT PULS
  • BURN BACK (Processor/Synergic)
  • PRE-GAS / POST-GAS (Processor/Synergic)
  • FEED BACK (Processor/Synergic)
  • TEST GAS (Processor/Synergic)
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • JOB MODE (Synergic)
  • RESTORE PROGRAM (Synergic)
Input power 50/60 Hz3x400 V
Protection – slow16 A
Welding current range30 – 195 A
Output voltage range19 – 34 V
Duty cycle 100 %120 A
Duty cycle 60 %150 A
Duty cycle 25 %195 A
Mains current/input 60 %6.8 A / 4.6 kVA
WindingCu
Number of adjustment points10
Digital volt-ampere meteronly PROC. and SYN.
Wire feeder2-roll
Standard equiped roll0.8 – 1.0
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions645 × 488 × 791 mm
Weight62 kg