+420 568 851 120 sales@kuhtreiber.cz
KIT 305 S

STANDARD – No. 50561  |  PROCESSOR – No. 50562  |  SYNERGIC – No. 51379

MIG|MAG  3×400 V  30-280 A  20

Three-phase MIG/MAG welding machines with removable wire feeder.

KIT 305 S are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 20-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • BURN BACK
  • FEED BACK
  • PRE-GAS / POST-GAS
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • RESTORE PROGRAM (Synergic)
  • JOB MODE (Synergic)
Input power 50/60 Hz3x400 V
Protection – slow25 A
Welding current range30 – 280 A
Output voltage range17 – 38 V
Duty cycle 100 %220 A
Duty cycle 60 %260 A
Duty cycle 30 %280 A
Mains current/input 60 %12.3 A / 8.6 kVA
WindingCu
Number of adjustment points20
Digital volt-ampere meteryes
Wire feeder2/4-roll by the type of wire-feeder
Standard equip roll1.0 – 1.2
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions1351 × 490 × 845 mm
Weight109 kg
KIT 305 S

STANDARD – No. 50561
PROCESSOR – No. 50562
SYNERGIC – No. 51379

MIG|MAG  3×400 V  30-280 A

Three-phase MIG/MAG welding machines with removable wire feeder.

KIT 305 S are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 20-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • BURN BACK
  • FEED BACK
  • PRE-GAS / POST-GAS
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • RESTORE PROGRAM (Synergic)
  • JOB MODE (Synergic)
Input power 50/60 Hz3x400 V
Protection – slow25 A
Welding current range30 – 280 A
Output voltage range17 – 38 V
Duty cycle 100 %220 A
Duty cycle 60 %260 A
Duty cycle 30 %280 A
Mains current/input 60 %12.3 A / 8.6 kVA
WindingCu
Number of adjustment points20
Digital volt-ampere meteryes
Wire feeder2/4-roll by the type of wire-feeder
Standard equip roll1.0 – 1.2
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions1351 × 490 × 845 mm
Weight109 kg