+420 568 851 120 sales@kuhtreiber.cz
KIT 305

STANDARD – No. 50217  |  PROCESSOR – No. 50396  |  SYNERGIC – No. 50429

MIG|MAG  3×400 V  30-280 A  20

Compact three-phase MIG/MAG welding machines.

KIT 305 are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.

The main advantages of machine KIT are excellent welding skills, 20-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.

In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 8 programmes for standard steels (2 types of gas and 4 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • BURN BACK
  • FEED BACK
  • PRE-GAS / POST-GAS
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • RESTORE PROGRAM (Synergic)
  • JOB MODE (Synergic)
Input power 50/60 Hz3x 400 V
Protection – slow25 A
Welding current range30 – 280 A
Output voltage range17 – 38 V
Duty cycle 100 %220 A
Duty cycle 60 %260 A
Duty cycle 30 %280 A
Mains current/input 60 %12.3 A / 8.6 kVA
WindingCu
Number of adjustment points20
Digital volt-ampere meteryes
Wire feeder2-roll
Standard equip roll1 – 1.2
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions806 × 490 × 822 mm
Weight93 kg
KIT 305

STANDARD – No. 50217
PROCESSOR – No. 50396
SYNERGIC – No. 50429

MIG  3-P  30-280 A

Compact three-phase MIG/MAG welding machines.

KIT 305 are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.

The main advantages of machine KIT are excellent welding skills, 20-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.

In the case of Synergic machine there is, in addition, automatic adjustment of welding parameters and a possibility of programming. Standard equipment 8 programmes for standard steels (2 types of gas and 4 Ø of wire). A possibility of simple recording of your own programmes 40 – 60 welding parameters.

PROPERTIES AND EQUIPMENT

  • 2-STROKE / 4-STROKE
  • EASY USE
  • SPOT PULS
  • TEST GAS
  • GENERATOR
  • BURN BACK
  • FEED BACK
  • PRE-GAS / POST-GAS
  • UP-DOWN (Processor/Synergic)
  • SOFT START (Processor/Synergic)
  • RESTORE PROGRAM (Synergic)
  • JOB MODE (Synergic)
Input power 50/60 Hz3x 400 V
Protection – slow25 A
Welding current range30 – 280 A
Output voltage range17 – 38 V
Duty cycle 100 %220 A
Duty cycle 60 %260 A
Duty cycle 30 %280 A
Mains current/input 60 %12.3 A / 8.6 kVA
WindingCu
Number of adjustment points20
Digital volt-ampere meteryes
Wire feeder2-roll
Standard equip roll1 – 1.2
Wire feeder speed1 – 20 m/min
Material of wire – Steel, Stainless steel / Aluminium / Cored wireyes
Ingress ProtectionIP 21
Dimensions806 × 490 × 822 mm
Weight93 kg