STANDARD – No. 50702 | PROCESSOR – No. 50804
MIG|MAG 3×400 V 30-250 A 10
Compact three-phase MIG/MAG welding machines.
KIT 309 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 10-grade voltage control, high power, high duty cycle, high reliability and easy operating.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- PRE-GAS / POST-GAS (only PROCESSOR)
- FEED BACK (only PROCESSOR)
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
- TEST GAS (only PROCESSOR)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 16 A |
| Welding current range | 30 – 250 A |
| Output voltage range | 17.7 – 39.2 V |
| Duty cycle 100 % | 170 A |
| Duty cycle 60 % | 200 A |
| Duty cycle 30 % | 250 A |
| Mains current/input 60 % | 9.2 A / 6.4 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 10 |
| Digital volt-ampere meter | only PROC. |
| Wire feeder | 2-roll |
| Standard equip roll | 0.8 – 1.0 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 738 × 490 × 782 mm |
| Weight | 68 kg |
STANDARD – No. 50702
PROCESSOR – No. 50804
KIT 309 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 10-grade voltage control, high power, high duty cycle, high reliability and easy operating.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- PRE-GAS / POST-GAS (only PROCESSOR)
- FEED BACK (only PROCESSOR)
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
- TEST GAS (only PROCESSOR)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 16 A |
| Welding current range | 30 – 250 A |
| Output voltage range | 17.7 – 39.2 V |
| Duty cycle 100 % | 170 A |
| Duty cycle 60 % | 200 A |
| Duty cycle 30 % | 250 A |
| Mains current/input 60 % | 9.2 A / 6.4 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 10 |
| Digital volt-ampere meter | only PROC. |
| Wire feeder | 2-roll |
| Standard equip roll | 0.8 – 1.0 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 738 × 490 × 782 mm |
| Weight | 68 kg |