STANDARD – No. 50405 | PROCESSOR – No. 50740 | SYNERGIC – No. 51272
MIG|MAG 3×400 V 30-350 A 40
Three-phase MIG/MAG welding machines with removable wire feeder.
KIT 405 S are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- FEED BACK
- PRE-GAS / POST-GAS
- UP-DOWN (Processor/Synergic)
- SOFT START (Processor/Synergic)
- RESTORE PROGRAM (Synergic)
- JOB MODE (Synergic)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 25 A |
| Welding current range | 30 – 350 A |
| Output voltage range | 18 – 40 V |
| Duty cycle 100 % | 260 A |
| Duty cycle 60 % | 300 A |
| Duty cycle 30 % | 350 A |
| Mains current/input 60 % | 15.3 A / 10.6 kVA |
| Winding | Cu |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 2/4-roll by the type of wire-feeder |
| Standard equip roll | 1.0 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 1351 × 490 × 845 mm |
| Weight | 119 kg |
STANDARD – No. 50405
PROCESSOR – No. 50740
SYNERGIC – No. 51272
Three-phase MIG/MAG welding machines with removable wire feeder.
KIT 405 S are professional welding machines equipped with a high-powered transformer with copper primary and secondary winding, robust all-metal wire feeder with an efficient motor, an EURO connector and electronics control.
The main advantages of machine KIT are excellent welding skills, 40-grade voltage control, high power, high duty cycle, high reliability and very easy operating of versions PROCESSOR and SYNERGIC.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK
- FEED BACK
- PRE-GAS / POST-GAS
- UP-DOWN (Processor/Synergic)
- SOFT START (Processor/Synergic)
- RESTORE PROGRAM (Synergic)
- JOB MODE (Synergic)
| Input power 50/60 Hz | 3x400 V |
| Protection – slow | 25 A |
| Welding current range | 30 – 350 A |
| Output voltage range | 18 – 40 V |
| Duty cycle 100 % | 260 A |
| Duty cycle 60 % | 300 A |
| Duty cycle 30 % | 350 A |
| Mains current/input 60 % | 15.3 A / 10.6 kVA |
| Winding | Cu |
| Number of adjustment points | 40 |
| Digital volt-ampere meter | yes |
| Wire feeder | 2/4-roll by the type of wire-feeder |
| Standard equip roll | 1.0 – 1.2 |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 |
| Dimensions | 1351 × 490 × 845 mm |
| Weight | 119 kg |