KIT 3500
STANDARD – No. 51148 | PROCESSOR – No. 51431
MIG|MAG 3×400 V 30-280 A 20
Compact three-phase MIG/MAG welding machines.
KIT 3500 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 20-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK (only PROCESSOR)
- PRE-GAS / POST-GAS (only PROCESSOR)
- FEED BACK (only PROCESSOR)
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
| Input power 50/60 Hz | 3x 400 V |
| Protection – slow | 25 A |
| Welding current range | 30 – 280 A |
| Output voltage range | 19.2 – 41.9 V |
| Duty cycle 100 % | 235 A |
| Duty cycle 60 % | 270 A |
| Duty cycle 40 % | 280 A |
| Mains current/input 60 % | 14.8 A / 10.6 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 20 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equiped roll | 1 – 1.2 mm |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 S |
| Dimensions | 902 × 510 × 890 mm |
| Weight | 88 kg |
KIT 3500
STANDARD – No. 51148
PROCESSOR – No. 51431
Compact three-phase MIG/MAG welding machines.
KIT 3500 are professional welding machines equipped with a high-powered transformer, robust wire feeder with an efficient motor, EURO connector and electronic control.
The main advantages of machines KIT are excellent welding properties, 20-grade voltage control, the possibility of high load machines with new construction, modern design, reliability and the simple control.
PROPERTIES AND EQUIPMENT
- 2-STROKE / 4-STROKE
- EASY USE
- SPOT PULS
- TEST GAS
- GENERATOR
- BURN BACK (only PROCESSOR)
- PRE-GAS / POST-GAS (only PROCESSOR)
- FEED BACK (only PROCESSOR)
- UP-DOWN (only PROCESSOR)
- SOFT START (only PROCESSOR)
| Input power 50/60 Hz | 3x 400 V |
| Protection – slow | 25 A |
| Welding current range | 30 – 280 A |
| Output voltage range | 19.2 – 41.9 V |
| Duty cycle 100 % | 235 A |
| Duty cycle 60 % | 270 A |
| Duty cycle 40 % | 280 A |
| Mains current/input 60 % | 14.8 A / 10.6 kVA |
| Winding | Cu/Al |
| Number of adjustment points | 20 |
| Digital volt-ampere meter | yes |
| Wire feeder | 4-roll |
| Standard equiped roll | 1 – 1.2 mm |
| Wire feeder speed | 1 – 20 m/min |
| Material of wire – Steel, Stainless steel / Aluminium / Cored wire | yes |
| Ingress Protection | IP 21 S |
| Dimensions | 902 × 510 × 890 mm |
| Weight | 88 kg |